電工鋼硅鋼片根據生產方式可分為熱軋電工鋼和冷軋電工鋼。熱軋硅鋼片因其性能落后近年已經逐步淘汰。根據晶體取向聚集程度將硅鋼分為無取向和取向是為廣泛接受的方法。冷軋無取向硅鋼是指0.5％~4.0％(Si＋Al)的合金，冷軋至0.65mm、安徽巢湖同城0.5mm和0.35mm后經退火涂層后制成。相比取向硅鋼，其晶粒織構類型較為漫散，各個方向上具有較為均勻的磁性能，而且磁各向異性較低，主要用作各類型電機和發電機的鐵芯疊片。冷軋產品厚度精度，尺寸公差等級，表面光滑度都達到較高水平，從而提高了產品疊片系數和材料的磁性能。冷軋無取向硅鋼生產工藝流程圖如圖1所示。

電工鋼硅鋼片Ultra-thin series: B15AHT1000, B15AHT1200, B15AT1000, B15AT1200B15AT1500, B15AT1550, B20AHT1000, B20AHT1200, B20AT1000, B20AT1200, B20AT1500, 20WTG1200, 20WTG1500 20WTG1550 B25AHV1200 B25AHV1300, B27AHV1400, B27AV1400, B30AHV1500 B30AHV1400, B35AV1700 B35AV1800High performance series: B35AH300, B50AH300, 50AH470, 50AH600, 50AH800, B50AH470, B50AH600, B50AH800, B50AR300, B50AR600, B50AR500, B50AR350, B20AT15000.35 series: B35A200, B35A210, B35A230, B35A250, B35A270,B35A300, B35A360, B35A440, B35A550, B35AH300, B35AR300, B35AY-10.5 series: B50A250, B50A270, B50A290, B50A310, B50A350, B50A400, B50A470, B50A600, B50A700, B50A800, B50A1000, B50A13000.65 series: B65A470, B65A530, B50A600B65A700, B65A800 B65A1000, B65A1300Super thick Series: 70WK340, 75WK400, 80WK420, 85WK450, 10W800 WFC-100A, silicon steel sheet performance: A low iron loss. As an important indicator of quality, each country divides the grade by the iron loss value. The lower the iron loss, the higher the grade and the higher the quality.B. High magnetic induction strength. Under the same magnetic field, the silicon steel sheet with high magnetic sensitivity can be obtained. The volume and weight of the iron core of the motor or transformer made by it are relatively small, which can save silicon steel sheet, copper wire and insulating materials, etc.C. High stacking coefficient. The surface of the silicon steel sheet is smooth, flat and uniform in thickness, which improves the stacking coefficient of the iron core.D. Good punching property. This is more important for manufacturing small and micro motor iron cores.E. The surface has good adhesion and weldability to the insulating film.