豫信致誠機械設備(鞍山市分公司)處于中站李封南會253號,是一家集研發、設計、生產、銷售為一體的公司。主營產品 水渠機，公司擁有一批的、從事本行業多年的科研開發人才及高素質的專業制造人才，依靠“開拓、創新、務實、科學”的設計理念，嚴格的生產工藝，優質的售后服務，贏得廣大用戶的一致贊譽和信賴。公司成立以來，以“客戶滿意就是我們榮譽”的經營理念，不斷創新，追求完美，迎合用戶及市場需求。
(1)軟管泵屬容積式類，具有無機器密封、自吸本領強、自清算等特性。
(2)無泵閥，不會孕育發生密封類泵的泄湯和睦阻征象，杜絕了因走漏而造成的跑、冒、滴、漏喪失和污染，自身現場潔凈。
(3)軟管泵布局簡樸，無葉輪、無容室等布局，順應性強，液體、漿狀和濃厚懸浮物料均可運送.分外是離彈性的軟管空腔能泵吸有雜質的液體、種種纖維物體以及含粒徑在軟管直徑1/4以下的固體料漿，并且平滑的軟管內腔不孕育發生任何堵塞。容許有較大的固態物粒子。運送介質的濃度可大于70%，因此常輕便輸送高濃度的物料等等。
一根內壁光滑，強度可靠的特制橡膠軟管安裝在泵體內部，通過一對壓輥沿著軟管旋轉擠壓，這樣的 旋轉使得介質往一個方向輸送而不會倒流，軟管在輸送介質之后，由被壓扁軟管的自身彈性和側導輪的強制下，軟管恢復原狀，此時，軟管內產生高真空將介質再次吸入管腔，然后介質在隨之而來的壓輥擠壓下從軟管內排出，如此周而復始，介質不斷的被吸入和排出。目前產品使用溫度為≤100℃。根據用戶需要可以開發使用溫度在120℃的軟管泵軟管產品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.
工業軟管泵不銹鋼齒輪泵，可輸送非潤滑油飲料低腐蝕性液體，配銅齒輪可輸送汽油苯等低內點液體。由于齒輪泵自吸能力差，一般是由于齒輪泵泵腔間隙較大所致。同時也是如果齒輪泵輸出端沒有“止回閥”，則必須是下一級齒輪泵的止回閥或控制閥。移動固定后，周圍工作人員可恢復手術。
Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.
