工業軟管泵不銹鋼齒輪泵，可輸送非潤滑油飲料低腐蝕性液體，配銅齒輪可輸送汽油苯等低內點液體。由于齒輪泵自吸能力差，一般是由于齒輪泵泵腔間隙較大所致。同時也是如果齒輪泵輸出端沒有“止回閥”，則必須是下一級齒輪泵的止回閥或控制閥。移動固定后，周圍工作人員可恢復手術。
Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.
1. 無閥工作，流道寬?？梢赃m應粘稠及含有顆粒漿料的泵送；
2. 定容泵送，無回流，流量穩定；
3. 容易實現流量調節，選用合適的外加部件，可以作為計量泵使用。
4. 泵送漿料只與擠壓軟管接觸，選用合適的軟管材質，可以適應各種漿料。
5. 進排口可自由轉換，當有異物堵塞時，反轉便可排出堵塞物；
6. 真空度高，自吸能力強；
7. 清洗方便，不需要拆卸，即可以清洗輸送管路
8. 維修簡便易行，易損件少（只有一根擠壓軟管）；
一根內壁光滑，強度可靠的特制橡膠軟管安裝在泵體內部，通過一對壓輥沿著軟管旋轉擠壓，這樣的 旋轉使得介質往一個方向輸送而不會倒流，軟管在輸送介質之后，由被壓扁軟管的自身彈性和側導輪的強制下，軟管恢復原狀，此時，軟管內產生高真空將介質再次吸入管腔，然后介質在隨之而來的壓輥擠壓下從軟管內排出，如此周而復始，介質不斷的被吸入和排出。目前產品使用溫度為≤100℃。根據用戶需要可以開發使用溫度在120℃的軟管泵軟管產品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.
豫信致誠機械設備(新余市分公司)始建于2018年，廠家現位于江西新余工業園區，廠家技術力量雄厚，生產檢測設備先進，人力資源充沛，管理方法科學，【水渠機】產品質量穩定可靠，售后服務完善，是一家集科研、開發、銷售、服務為一體的大型綜合性【水渠機】企業。
